- TICO - Anti Vibration MaterialsHome
- All Anti-vibration Materials
- All Anti-vibration Materials
All Anti-vibration Materials
TICO S/PA anti-vibration material is a high performance machinery mounting pad. Suitable for the majority of many applications where ease of installation and flexibility of plant layout are prime factors.
Tico Slide Bearings accommodate large movements in pipework installations as well as many other types of structure. Comprised of two separate components, which work in tandem to provide a plane sliding surface with a low coefficient of friction.
Tico Z/PA is an anti vibration pad of elastomer composite, based on polychloroprene rubber enhanced with the inclusion of cork.
Tico VR/PA is a anti vibration laminated elastomeric pad comprising of synthetic rubber, modified by the inclusion of cork, reinforced with piles of high tensile fabric.
High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.
TICO PF/PA pads should be used where the material’s high stiffness and impact absorption properties are especially important. Typical applications are for impact absorption on piling hammers, sheet piling buffers and as resilient spigot packings.
Anti vibration pads TICO M is a low stress machinery mounting material made from cork enhanced polyisoprene rubber and is usually specified for low stress applications where situations benefit from its good damping properties.
The LF/PA/80 Anti Vibration Pad is the same compound material as the LF/PA/10 but has a higher load bearing range. These pads also have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
TICO LF/PA/10 anti vibration pads have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
TICO Adjustamounts (levelling mounts) are specially designed for mounting machines and structures where accurate levelling is of prime importance, and where slight additional height is required.
Synthetic rubber and granulated cork having improved physical characteristics designed to withstand elevated temperatures.
TICO FR anti vibration material consists of a blend of polymers and specialised compounding ingredients developed to operate in the aggressive environments in the offshore and petrochemical industries.
TICO FF/PA is a combination pad, it is normally based on TICO PF/PA material, bonded to a comformable layer.
Like the Tico CF/PA/10, the CF/PA/80 Anti-vibration pad is composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.
TICO CF/PA/10 Anti-vibration pads are composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.
TICO S/WA Bolt Isolation Washer is used to prevent transmission of vibration and machine noise through the bolt to the surrounding area.
Used in conjunction with TICO S/WA & TICO S/CO the MS/WA steel washer, is used to prevent transmission of vibration and machine noise through the bolt to the surrounding area.