- TICO - Anti Vibration MaterialsHome
- Engineering Products
- Engineering Products
TICO has a long been the vibration control material of choice amongst Engineers and Fabricators alike. The range of TICO products encompasses that whatever the Vibration problem there is a TICO solution at hand.
The TICO range of products includes levelling mounts, Anti-vibrations washers and collards and Anti-vibration pads that can be used on all sorts of engineering equipment such as Lathes, CNC routers, compressors etc. Our technical teams are on hand to provide advice on the most suitable TICO pad and detailed analysis of the level of vibration attenuation you can expect.
Engineering Typical Applications
Engineering Products
High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.
TICO HT/CL clamp strip isolates vibration between pipe-work and hanger, this clamp strip is a rubber bonded cork material which has been engineered to accommodate higher operating temperatures and is green in colour.
TICO S/CL clamp strip isolates vibration between pipe-work and hanger, this clamp strip is manufactured from our well known Tico S rubber bonded cork material and is red/brown in colour.
TICO VHT/CL fire retartant clamp strip isolates vibration between pipe-work and hanger, this clamp strip is an extruded polymer with a wide operating temperature range of -50°C to 300°C (-58°F to 572°F)
Tico Slide Bearings accommodate large movements in pipework installations as well as many other types of structure. Comprised of two separate components, which work in tandem to provide a plane sliding surface with a low coefficient of friction.
TICO Pipe Supports/Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating larger axial and torsional movements of the pipe.
TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe.
TICO VHT Pipe Support is ideally suited for applications where temperatures may be expected to range from –60°C to +300°C continuous, +350°C intermittent. The Pipe Support is also resistant to a wide range of oils and environmental conditions.