- TICO - Anti Vibration MaterialsHome
- Low Frequency
- Low Frequency
There are certain applications where a very high degree of isolation is required – in particular, applications where the frequency of the disturbing vibration is very low. In addition there are some vibration critical applications where the plant is lightweight and the required performance cannot be achieved with TICO S (which is most effective under higher loads). TICO LF/PA and TICO CF/PA have been specifically designed to give excellent low frequency vibration isolation.
Low Frequency
TICO LF/PA/10 anti vibration pads have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
The LF/PA/80 Anti Vibration Pad is the same compound material as the LF/PA/10 but has a higher load bearing range. These pads also have a fluted rubber construction which gives the pads excellent low frequency properties. The core is sandwiched between layers of cork not only to facilitate bonding of the pads into position but also allowing, in certain applications, concrete to be poured directly on top of them.
TICO CF/PA/10 Anti-vibration pads are composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.
Like the Tico CF/PA/10, the CF/PA/80 Anti-vibration pad is composed of a micro cellular rubber sponge with upper and lower surfaces of geotextile fabric which protect the rubber and facilitate bonding.